Varnishing Tips and Photos by Joel Terbrueggen When it comes to varnishing there are any number of ways to accomplish it. I do not believe one way is necessarily better than another, it all comes down to whatever technique you are most comfortable with. After sealing, I use a Scotch Brite pad or 320 grit…
by Brian Keen member of the Ohio Valley chapter Sometimes buying the right boat is meant to be. I always have loved the hardtop Lyman’s. Most hardtop Lyman’s usually run in the 25 to 26-foot range. I don’t really enjoy towing boats that big and I don’t have a lake house with a lift. About…
by Tom Lehn member of the Ohio Valley chapter To understand the story of the stern flagpole, you need to know a little about Cherry Float. She is a 17’ 1948 Chris-Craft Deluxe Runabout with the KBL 131hp engine. She adopted me as caretaker in June 2014. She was purchased in August 1947 by Thomas…
Staining Tips and photos are by Joel Terbrueggen Pre-Staining Most of the time, new or replacement planks are much lighter than the surrounding wood or original wood. Here is a technique that usually works well for me. If the color difference isn’t significant this 1st option sometimes works. After sanding and fairing the area with…
Imagine my surprise when as a novice to boating I found out that “Brightwork” referred to the varnished wood on a boat. It’s easy to display that showroom shine on your boat when it is in the dock at a show or even getting ready for a run to the neighborhood marina for an ice…
Article and Photos by Joel Terbrueggen This article is to let you know that you should not underestimate the usage of superglue in finish repairs. I like to use both the Thin and Medium viscosity along with the Accelerator to speed up the curing process to instantaneous. Here are some instances that I have found…
Safe Boating week is May 18th through May 24th. For more information, visit www.safeboatingcampaign.com One of the take-aways from the ACBS Symposium delivered at the Sunnyland Boat Festival on March 23, 2018 was a laminated CHECK LIST FOR FIRST TIME OPERATION. This list was first compiled by Lou Rauh and is now shared by Brian…
Varnishing Tips and Photos by Joel Terbrueggen When it comes to varnishing there are any number of ways to accomplish it. I do not believe one way is necessarily better than another, it all comes down to whatever technique you are most comfortable with. After sealing, I use a Scotch Brite pad or 320 grit…
Lou Rauh gathered people who had worked for The Antique Boat Connection (center) for the last 30 years for a celebration of friends and wood boats. The idea of having a central location for buying and selling classic boats occurred to Lou in the 1980s when he was looking for a boat of his own. He turned…
Pictured above are the trip attendees: Charlie & Mel Aseltine, Tom & Joyce Danford, Jeff Funk with son-in-law, Matt and friend Tim, Jim Lawson and brother David, Rich Love, Dennis & Kathy Ryan, and Bob & Martha White The annual fall boat trip planned by the Ohio Valley Chapter of the ACBS almost did not…
Article and Photos by Joel Terbrueggen The first thing you should do is to make sure you have marked the top (or bottom) of the boot top at the 3 corners (both transom sides and the bow). An awl, ice pick, a glass cutting tool, or even a thin blade saw to leave a small…
Article and Photos by Joel Terbrueggen This article is to let you know that you should not underestimate the usage of superglue in finish repairs. I like to use both the Thin and Medium viscosity along with the Accelerator to speed up the curing process to instantaneous. Here are some instances that I have found…