1) Stored inside approximately 25 yrs with engine removed.
2) Bottom & transom frames replaced, inner & outer planking replaced to waterline using CPES & 3M 5200 method. New 1/2" marine plywood floor boards cut, fitted & in place.
3) Hull sealed with Interlux 2000/2001E barrier coat. Bottom finished with Pettit Hard Racing Copper Bronze. Hull finished with Interlux Schooner 96.
4) Chevrolet 283 engine rebuilt by Hurley Engine Services, Birmingham, Al.
5) All chrome parts refinished & triple plated by Graves Plating, Florence, Al.
6) Instruments rebuilt by Kocian Instruments, Depere, Wi.
7) Interior seat backs, springs & side panels included but need new upholstery.
8) No trailer, construction dolly included as are 4 sheets of 1/2" plywood.