By Graeme Hoatson Beattie member of the Toronto chapter Recently I saw a post on the Facebook page “Vintage Toronto” that caught my attention. It was a picture of an antique launch used by the then Toronto Life Saving and Police Patrol Service, a department of the Toronto Harbour Commissioners established in 1921. I was…
DetailsNovember of 1945 and the war is over. The United States Navy decides it no longer wants the molded plywood glider airplanes, being made on the assembly line at Allied Aviation, in Dundalk, MD. The management and workers stand, looking at the five finished and tested ones they had made and the fifteen more along…
DetailsBy Maggi Cassell President of Southern California chapter Polished chrome, varnish, and gel-coat shone brightly in the spring sunshine last weekend, as the Southern California chapter put on a double-header of trailer shows. We displayed a dozen boats on Saturday in Dana Point, California, as part of the annual Festival of Whales along the waterfront.…
DetailsPhoto Credit: SML Chapter of ACBS Members of the Smith Mountain Lake Chapter of the Antique and Classic Boat Society participated in the 2019 Roanoke Boat Show this past weekend. This year the chapter displayed two recently restored wooden boats. Chapter members Bill and Sue Garrecht proudly displayed their 1955 Chris-Craft Capri named “Water Lily”…
DetailsBy John & Amanda VanderWeele members of Water Wonderland & Michigan chapters Our Larson is a 15’ All American with a 60 horsepower 4-cylinder Renault and Mercruiser 0 outdrive. We acquired Larson in May of 2014 from the niece of the second owner. The boat was purchased new in 1966 from Lubbers in Hudsonville Michigan…
DetailsBy Matt Anstett & Brad Stanwick members of the Michigan chapter I found our second Sea Skiff for sale in September of 2014 at the Riverside Marina on Harsen’s Island across the channel from Algonac, Michigan where the original Chris-Craft company was founded. My first Sea Skiff, “Screws Loose”, never stopped leaking gas from a…
DetailsBy David B. Weiseth member of the Pacific Northwest chapter Perhaps most of us see in present day activities hints of those interests in early childhood. I often gaze upon our Chris Craft as it sits alongside a dock and think back to the days of a youngster playing in the bathtub with a wooden…
DetailsBy John Lawrence member of No Cal. /Lake Tahoe chapter My interest in owning a 3-point hydroplane began back in the 1950’s, when I attended the boat races at Lake Me,tjtt in Oakland, California. The thrill of these boats running around the two buoy course was enough to excite the young and old. The sounds…
DetailsBy Darrin Podskalny member of the Water Wonderland chapter The ownership of our 1959 Skipper-Craft started when a good friend of mine, Geoff Reynolds from Holland, Michigan had shown me his Skipper-Craft on a spring weekend in 2001. Geoff and I were heading to a swap meet for outboards and boats in lower Michigan. When…
Detailsby Andrew Barnett “ERICA” was made by an apprentice carpenter in Erica, VICTORIA. [State of Australia] The town is a log cutting town and Chris learnt about the types of wood from the mill. He finished the reproduction in 2005 and relocated to Hobart, Tasmania some years later. Did 50 Knots while I was in…
DetailsThis week’s tour features boats from 1968 The first one with the name Lot of Fun Too is a 1968 Evinrude 16-foot Sportsman with a 1968 Buick HU-16C engine. Lot of Fun Too is owned by Chuck and Nadine Breen. Chuck says, “Boat purchased in 1968 by Richard Willis of Hackensack, MN. Sold to Curt…
Detailsby Howard P. Johnson Jr. As a kid I helped my Dad refinish and maintain his boats, by the time I was a teenager he was letting me handle the bottom and the varnish but never use the boat. I finished my first more recent Chris Craft restoration in `94 and couldn’t come up with…
Details
